Electrifying Facts on Electric Vehicle Conversion – All You Need to Know

Right now, with the gas at prices that we have never seen before, many people are looking for ways to cut down on gas consumption and there are some people who are looking at ways to avoid using gas at all. They are researching electric vehicle conversion which is converting a car or small truck to run on electricity instead of gas. There are many benefits to having vehicle that runs on just electric but an electric vehicle conversion is no simple task. The benefits for the vehicle are, smooth running, low maintenance, low vibration, economical, and totally convenient. An electric vehicle conversion is complicated. As well as no longer using gas the vehicle will no longer use oil, an exhaust, belts, hoses, water pump, coolant, radiator, spark plugs, plug wires, and injectors. So this is not a job that should be undertaken by an amateur.

If you are a mechanic who knows what they are doing, the electric vehicle conversion can be done in your own garage, with few specialist tools. The materials needed for the electric vehicle conversion is of course the electric motor, the motor mount, motor controller, speed controller, system control box, high current shunt, high current fuse, high current circuit breaker, current meter, voltmeter, clutch plate hub adapter, main battery bank, 12V battery charger, 6V golf cart batteries (common choice), battery rack, cable terminal lugs, along with a vacuum pump and switch kit for the brakes.

Other materials for the electric vehicle conversion will include any kind of framework that you would want to use to house the batteries that are needed to run the vehicle. Cars that are most commonly used used in electric vehicle conversion are the Chevy S10, Dodge Colt, Daytona Ford Escort, Porsche 914, Honda Civic, Mazda B2000 pickup, Datsun pickup, Plymouth Sundance, Pontiac Fiero, Suzuki Samurai, Toyota pickup, and Volkswagen Beetles.

The cost of the electric vehicle conversion will vary and depend greatly on the vehicle that is going to be converted. This can range from $6500 and $9500 dollars and that estimate does not include the cost of the vehicle itself.

Depending on the size of the vehicle and the number of batteries that are used in the conversion, the distance the vehicle can drive on one charge will vary accordingly. The general Chevy S10 which has 16 six-volt batteries and weighs a total of 3700 pounds, will go about 35 miles on a full charge. If you have more batteries on a lighter car, then you will be able to go much further on a single charge.

The weight of the vehicle will also factor on how fast the vehicle will be able to go. The lighter the car and more batteries, the faster it can go. Historically electrically converted cars were slow but now they can achieve speeds of 60 to 80 mph.

Deciding on whether this option is right for you really depends on your mileage, how long you intend to keep you vehicle, and of course your commitment to the environment. Hopefully i’ve sparked enough interest for you to want to find out more.

Electric Vehicle Kits – Build Your Own Electric Car

With rising fuel costs, more and more people and are looking for alternatives. One such alternative that is gaining popularity, especially with the do-it yourself types, are the electric vehicle kits. Anyone familiar with automobiles can now use these kits to convert traditional gas powered vehicles to one powered by electric current.

However, converting a traditional Gas powered vehicle into an electric vehicle can be a very daunting task. Only those who are the very mechanically minded should try this. To convert the vehicle will require extensive modifications to nearly all-mechanical parts of the car. Everything from the engine to the radiator, heater and air-conditioning, to the gauges on the panel. On top of that, the electric cars have to be recharged on a regular basis, which means having to purchase or use the services of recharging station. Solar power could be another potential source of power for the electric vehicle.

Can any car be converted into an electric vehicle?

Unfortunately, the answer is no. Not all cars can be converted into an electric vehicle. However, and the most common electric vehicle kit seems to be the Chevy S-10 pick up kit. For examples to follow just do a search online for Chevy S-10 pickup Electric conversions.
Other cars that are good candidates for conversion are the Chevy Geo, especially from 1989 to 1999. These cars are good potential candidates for an electric vehicle kit conversion. Cars similar to the Chevy Geo Metro, such as the Chevy Sprint, Pontiac Firefly and the Suzuki Swift are also ideal for conversions too.

Are there downsides to using an electric vehicle kit?

Going back a few years, many people associated electric powered vehicles with slowness and a lack of power. But as usual, thanks to technology, significant advances in the electric vehicle have changed all that. With these electric vehicle kits some cars can reach top speeds of between 70 and 75 mph. nonetheless, converting to electric power still has its drawbacks.

The biggest drawback it is of course the need for recharging the batteries. As an example, the Chevy Geo Metro kit must be recharged every 20 to 40 miles, depending on driving habits and battery quality. For city driving, this would be ideal. However, for lengthy commutes on the highway, this would not be ideal.

The Chevy S-10 with an electric vehicle kit installed will run a little longer on a single charge. On a single charge, the S-10 should last between 40 and 60 miles. Again this depends upon the driving habits as well as the size and quality of batteries. Some S-10 models can be equipped with solar powered panels which would in reduced in the need for charging, at least when driving during daylight hours.

Converting vehicles with electric vehicle kits is not a cheap affair. Most conversion kits seem to cost between $8000 to $10,000. And this does not even include professional installation as well as the cost of the batteries, not to mention access to or the purchase of a charging station.

Quite frankly, with the cost involved of using an electric vehicle kit, it probably wouldn’t be very practical for the average consumer, especially if they do a lot of highway driving. However, that being said, it probably would be ideal for a back yard mechanic who loves to tinker with cars and has a few bucks to throw around and wants to impress his beer-drinking buddies.

Eliminate Chronic Car Problems With Electric Vehicle Conversions

Regardless of where you travel to in Australia, you will always be putting miles on your car. Unfortunately, the parts used in high performance engines found in modern cars wear out much faster than the ones used years ago. For example, the fuel pump in modern cars often dies out after 60,000 to 90,000 Km of travel. If you check your warranty information, you will most likely find that the fuel pump is not covered after 60,000 Km, even on an extended warranty plan. If your odometer reading is approaching this number, electric vehicle conversions may represent a cost effective way to get out of chronic expenses associated with a high mileage vehicle.

Critical Car Parts and High Compression Engine Wear

Not so long ago, fuel pumps were one of the easiest things on a car to replace. All you really needed to do was search around near the carburetor, take the old pump out, and then put the new one in. Typically, it was a job you could accomplish in under an hour, right in your own back yard. At the same time, fuel pumps tended to cost well under 100.00.

By contrast, today’s vehicles use fuel injectors that require a very high compression ratio from the fuel pump. This type of pump is almost always housed in the fuel tank. They also cost several hundred dollars per unit. In order to replace the pump, you will need to take out the fuel tank, and then hope the mechanic will not damage the neck of the tank while removing the old pump. Because it tends to be a difficult job, you may wind up paying well over $1500.00 to have a new pump installed. On top of that, if they do damage the gas tank, you may wind up spending an additional $1000.00 to solve that problem.

Once the fuel pump is replaced, it can significantly alter the electrical system of the vehicle. For example, a number of cars and trucks develop computer problems, as well as a tendency to die out randomly once the new fuel pump is installed. Electric cars are virtually maintenance free. Electric vehicle conversions are worth exploring, and much safer in this type of situation. At the very least, you won’t have to worry about the motor dieing at an inconvenient time.

While you may not be aware of it, compression gaskets, valves, fuel injectors, and engine heads wear out faster when exposed to higher combustion temperatures and compression ratios. No matter how well you maintain and service your vehicle, it will not change this aspect of modern engine performance. Once your car passes the 100,000 Km mark, the best of the engine and transmission lifespan will be used up. Perhaps this is one of the reasons why very few manufacturers will guarantee a vehicle engine and transmission past 100,000 Km. Under these conditions, electric vehicle conversions offer a viable, safer, and cheaper alternative to help you maintain reliable transportation.

Deep Engine Computer Problems and Internal Combustion Engines

Even though the computer modules in your car are often housed in easy to reach places, they obtain data from sensors deep within the engine. For example, oxygen sensors may be positioned within the cylinder head. There are also some sensors that may be housed deep in the engine block. In some cases, these sensors monitor the flow of oil and coolants through the block. Once these sensors malfunction, they can cause piston heads to seize up, as well as ruin other critical parts of the main engine. At the same time, replacing these sensors may cost several thousand dollars if the engine has to be taken out, or the warranty on the electrical system is up.

Therefore, when the fuel pump causes changes in the electrical system, it can have hidden consequences. As with other electrical devices, when a new component is added, it can disrupt the pattern, and lead to serious consequences. When you make use of electric vehicle conversions, you will not need to worry about disrupting the electrical harness or the engine sensors. In fact, you will no longer need to worry about an engine block at all. Instead, your vehicle will run on a nice, quiet electrical motor that requires very little in the way of maintenance.

The Best Cars for Electric Fuel Conversions

If you buy a used car, you will always worry about repairs if you do not take steps to change the engine, transmission, and fuel pump. That said, if another used car is in better shape than the one you have now, you can always see about getting an electric car conversion in the near future. At the very least, you can have peace of mind knowing that you will get many years of trouble free driving out of it.

People that own cars today do not realize they could have a financial time bomb sitting on their hands. Regardless of whether the fuel pump dies in the middle of traffic, or the engine gaskets blows, it will cost you to have the vehicle repaired. When you are under pressure to get your car back as quickly as possible, you will most likely go on paying bigger repair bills, rather than evaluate the expanded benefits associated with electric vehicle conversions. Take the time now to evaluate your financial commitment to owning a petrol car. Switching to all electric is easier than you realize.

Today, electric vehicle conversions are available right here in Australia. You can easily extend the life of your current vehicle, and help do your part in providing for a cleaner more sustainable future, especially in your part of the world. When it comes right down to it, if you own a car or two, the best thing you can do is look into electric vehicle conversions today.